Tascam DA-98HR User Manual Page 53
- Page / 100
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
8 – DTRS synchronization–Machine offset
TASCAM DA-98HR 53
Another DA-98HR (the slave) has a tape with some
tracks containing video backing music. It is neces-
sary to produce an offset between the two so that
when the master is played, the music tracks will start
at the correct time relative to the dialog and reference
tracks.
1 Locate the slave tape with the backing music to
the start of the music. The shuttle mode may be
useful here (7.6, “Shuttle operations”).
2 Rewind the master to a little before you want
the music to enter.
3 Make sure the slave is ready to accept an “on-
the-fly” offset entry as described above.
4 Start playing the master DA-98HR.
5 When the music entry point is reached, press
the § or ¶ key
on the slave machine to cap-
ture the offset point.
6 Stop the master, and set the slave into
CHASE
mode (8.2.3, “Master/slave settings (CHASE
mode)”).
7 Rewind the master to a little before the music
entry and start playing.
The slave machine now follows the transport
movements of the master, with the appropriate
offset, so that the music enters at the right
point.
8.4.5 Clock mode
There are some circumstances where it may be nec-
essary to use independent reference clocks on a chain
of DTRS units when
TC time mode (see 9.2, “Tape
timecode mode”) is selected.
There are two settings,
Auto and
Individual (individual).
Note that this is only relevant when the time mode is
set to TC, rather than ABS (see 9.1, “ABS and
SMPTE/EBU timecode”).
Auto is the default, and the unit behaves as fol-
lows when this is selected.
If
Individual is selected, the unit behaves
as follows:
1 Select menu group A, move the cursor to
ClkMode, and press ENTER:
2 Use the § and ¶ keys to select one of the two
settings:
Auto and Individual.
NOTE
This does not mean that you can use two different word
clocks in a system—it means that the same word clock can
be fed in more than one way to different units in a chain of
DTRS recorders.
Copy of video worktape audio tracks
Connection from
SYNC OUT to
SYNC IN
00:57:00:00
Start of tape
01:00:00:00
Start of video
01:02:21:18
Music entry
00:57:00:00
Start of tape
01:00:00:00
Start of music (tape
is cued here)
Backing music
Press the § or ¶ key at this
point. The offset will be set to
00 02 21 18
Slave unit’s time
mode
Master DA-98HR
Slave DTRS units
a
a.DA-98HR, DA-78HR and v2.0 DA-98 units
ABS
All clock sources
DTRS sync
TC
Internal Internal
WORD, VIDEO, AES/
EBU, or SLOT
DTRS sync
Slave unit’s time
mode
Master DA-98HR
Slave DTRS units
a
a.DA-98HR, DA-78HR and v2.0 DA-98 units
ABS
All clock sources
DTRS sync
TC
Internal, WORD,
VIDEO, AES/EBU or
SLOT
Clock Mode
Auto
- Digital Multitrack Recorder 1
- Important Safety Precautions 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- Table of Contents 4
- 8 – DTRS synchronization 5
- 10 – External control 5
- 1.1 Unpacking 7
- 1.2 Features 7
- 8 TASCAM DA-98HR 8
- 1.3 Using this manual 8
- 1.4 Notes and precautions 8
- 1.4.2 Confidence replay 9
- 1.4.4 Installing the DA-98HR 9
- 10 TASCAM DA-98HR 10
- 1.5 Recommended tapes 10
- 1.5.1 Tape brands 11
- 2 – Front and rear panels 12
- 14 TASCAM DA-98HR 14
- 16 TASCAM DA-98HR 16
- 2.2 Rear Panel connectors 17
- 18 TASCAM DA-98HR 18
- 3 – Connections 19
- 20 TASCAM DA-98HR 20
- 3.2 Synchronization 20
- 3.3 Control connections 21
- 3.4 Connection to other 21
- TASCAM units 21
- 22 TASCAM DA-98HR 22
- 4 – Menu operations 23
- 24 TASCAM DA-98HR 24
- 4.2 About the function keys 24
- 4.3 Assigning menus to 25
- 26 TASCAM DA-98HR 26
- 5 – Monitoring modes 27
- 28 TASCAM DA-98HR 28
- 5.2 Patching the outputs 28
- 5.3 Confidence mode 28
- 5.4 Mixdown patchbay 29
- 30 TASCAM DA-98HR 30
- 6 – Basic Operations 31
- 4x 4x —————— 32
- 2x 2x 2x 2x ———— 32
- 2x 2x 2x base base ——— 32
- 2x 2x base base base base —— 32
- Select Track fs 33
- 176k 88k 44k 33
- 34 TASCAM DA-98HR 34
- 6.4 Overdubbing 35
- 6.5 Track bouncing 35
- 6.6 Punch-in and punch-out 35
- 36 TASCAM DA-98HR 36
- 38 TASCAM DA-98HR 38
- M so that the indicator 39
- 6.6.10 Exiting punch-in mode 39
- G to exit the AUTO 39
- 7 – Advanced operations 40
- 7.2 Function key location 41
- 42 TASCAM DA-98HR 42
- 7.3 Track delay 42
- 7.4 Crossfade time 43
- 44 TASCAM DA-98HR 44
- 7.6 Shuttle operations 44
- Shuttle Mute 45
- TASCAM –16 dB +4 dBu +20 dBu 45
- SMPTE –20 dB +4 dBu +24 dBu 45
- Sine Oscillator 46
- TDIF Word Length 46
- 7.11 REC MUTE (recording 47
- 48 TASCAM DA-98HR 48
- 7.12 Dither 48
- 7.13 Output word length 48
- 7.15 Setting the power-on 49
- 8.3 DTRS emulation 51
- 52 TASCAM DA-98HR 52
- 8.4 Machine offset 52
- 8.4.5 Clock mode 53
- 54 TASCAM DA-98HR 54
- 8.5 Digital dubbing 54
- 8.6 Error messages 55
- 00 – 01 33 56
- 01 – 02 33 56
- 02 – 03 34 56
- 9.2 Tape timecode mode 57
- 58 TASCAM DA-98HR 58
- 9.3 Recording timecode 58
- 60 TASCAM DA-98HR 60
- 62 TASCAM DA-98HR 62
- 9.4 Selecting the frame rate 62
- 9.5 Timecode input and output 62
- settings, but can use 63
- 9.5.3 Timecode output format 63
- , “Machine offset”) 64
- +00:10:00:00) 66
- 9.7 Video resolution 67
- 68 TASCAM DA-98HR 68
- 70 TASCAM DA-98HR 70
- U and REW T keys light. If 71
- 10.3.6 Track mapping 71
- 10.3.7 Timecode track mapping 71
- 72 TASCAM DA-98HR 72
- 10.4 Bus protocol 72
- 10.5 MIDI Machine Control 72
- TASCAM DA-98HR 73 73
- 74 TASCAM DA-98HR 74
- 11.1 Menu groups 74
- Time value to 75
- Time to sub 76
- E m l D e v T C R e c E N 77
- R e c D l y F a s t S p d 77
- T r k M a p C u e u p T l y 77
- M T C O u t M I D I I D 77
- 9.2, “Tape timecode 78
- C b i t M o d e 79
- O u t W d L e n M i x D o w n 79
- 80 TASCAM DA-98HR 80
- 11.2 Menu item index 81
- 82 TASCAM DA-98HR 82
- 12 – Maintenance and settings 83
- 84 TASCAM DA-98HR 84
- 12.2 Checking error rates 84
- 12.3 Memory backup 84
- 12.4 User setups in RAM 85
- 86 TASCAM DA-98HR 86
- 12.5 Tape storage of settings 86
- 12.6 Checking version numbers 87
- 88 TASCAM DA-98HR 88
- 13.1 DA-98HR options 88
- 13.2 Specifications 89
- Up to 24 hours (jamsync 90
- 13.3 MMC Bit Map Array 91
- 92 TASCAM DA-98HR 92
- TASCAM DA-98HR 93 93
- 94 TASCAM DA-98HR 94
- 13.5 MIDI Control Change 94
- 13.6 MIDI System Exclusive 94
- 13.6.6 Input Patch setup 95
- 96 TASCAM DA-98HR 96
- 98 TASCAM DA-98HR 98
- Printed in Japan S MA-379A 100
Related products and manuals for Cassette players Tascam DA-98HR
(8 pages)
Cassette players Tascam PORTA02 User Manual
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 1.373 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals