Tascam GA-100CD User Manual download pdf (Page 12)

2 – Part names and functions

12 TASCAM GA-100CD

Rear panel

/ ! $# % ^ &@

/ POWER switch

Press to turn the power ON and OFF.

! ~ IN

Use the supplied power cord to connect the amp

to an AC power outlet.

Conrm that the voltage

matches that marked on the rear panel of your

GA-100CD amp.

@ CD/EFFECT FOOTSWITCH jack

Use a TASCAM RC-30P or similar footswitch

to control playback/pause, bank number, tuner

operation and other functions. Dual footswitch use

is possible. (See “Changing settings” on page 21.)

# GUITAR CHANNEL FOOTSWITCH jack

Use a TASCAM RC-30P or similar footswitch to

change between clean and overdrive channels.

$ EFFECT SEND and RETURN jacks

Use these to send the guitar signal to an external

effect loop after it has passed through the

GA-100CD’s preamp.

% LINE IN (L, R) jacks

Connect an external line level (-10 dBV) signal from

a synthesizer, guitar preamp, MD player or other

device. The signal from the external device is output

through the sub-speakers.

^ LINE OUT (L, R) jacks

Outputs the mix of MAIN MASTER VOLUME and

SUB MASTER VOLUME signals and the signal

from the

LINE IN jacks at –10 dBV levels.

& PHONES jack

Connect standard stereo headphones to this 1/4"

jack to listen to CDs or practice alone.

Outputs the mix of

MAIN MASTER VOLUME and

SUB MASTER VOLUME signals along with the

input signal from the

LINE IN jack.

NOTE

When the Phones jack is in use, the GA-100CD will

not output sound from its speakers.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments

Tascam GA-100CD User Manual Page 12

Comments to this Manuals

Related products and manuals for Guitar accessories Tascam GA-100CD