Tascam MMR-8 User Manual download pdf (Page 144)

TASCAM MMR-8 Owner’s Manual • Appendix D • Cable Information

144

ANALOG INPUT & OUTPUT Connectors pinouts

PIN # Signal Description PIN # Signal Description

1 Channel 8 + signal 14 Channel 8 - signal

2 Channel 8 ground 15 Channel 7 + signal

3 Channel 7 - signal 16 Channel 7 ground

4 Channel 6 + signal 17 Channel 6 - signal

5 Channel 6 ground 18 Channel 5 + signal

6 Channel 5 - signal 19 Channel 5 ground

7 Channel 4 + signal 20 Channel 4 - signal

8 Channel 4 ground 21 Channel 3 + signal

9 Channel 3 - signal 22 Channel 3 ground

10 Channel 2 + signal 23 Channel 2 -signal

11 Channel 2 ground 24 Channel 1 + signal

12 Channel 1 - signal 25 Channel 1 ground

13 No connection

NOTES:

1. 25-pin D-subminiature female connector (DB-25). The pinouts follow the

TASCAM DA-88 configuration. Each input is differential with the (+) inputs

being the non-inverting input and the (-) being the inverting input.

2. Input impedance is 10k ohm.

3. Output impedance is 75 ohm.

4. Max load 12.28 VRMS

BIPH (Biphase) Connectors pinout

PIN # Signal Description

1 Ground

2 Phase-A

3 Phase-B

4 Phase-B

5 Phase-A

6 Ground

NOTES:

1. RJ12 compatible Modular Plug, 6 Position, 6 Conductor.: Flat Wire - Stranded.

Round Wire - Stranded. DataComm Warehouse (http://kerry.warehouse.com/)

can supply these parts, however, many other sources available.

2. The four Biphase Inputs are selected one-at-a-time by the Sync Group setting.

3. Not intended for public telecommunication network.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 172 173

No comments

Tascam MMR-8 User Manual Page 144