Tascam MD-350 User Manual download pdf (Page 17)

Reproducción

3. Inicie la reproducción.

Presione el botón de reproducción

[

¥PLAY], (Se encenderá "¥").

La reproducción se inicia desde la

primera pista. "001" aparece en la

indicación "TRACK NO.".

… Cuando termine la reproducción del

disco, los números de pista

desaparecen del calendario musical.

… Si el número total de pistas excede 20

(se encenderá " "). El número de

pista debe ser confirmado en la

indicación TRACK NO..

… Para reproducir la pista recién grabada

desde el principio, presione el botón

[

¥PLAY] inmediatamente después que

la grabación se haya detenido (dentro

de 10 segundos).

… Si pasan diez segundos o más después

que la grabación se haya detenido, o si

se presiona el botón [

¥ PLAY] después

que el botón [

ª STOP] haya sido

presionado, la reproducción se iniciará

desde la primera pista del disco.

4. Para parar la reproducción, presione el

botón de parada [

ª STOP].

ª Parada temporaria de la reproducción

(listo)

Presione el botón de pausa [

π READY],

(se encenderá "

π").

… Presione el botón [

¥PLAY] o [π READY]

para continuar la reproducción.

Reproducción normal

1. Presione el botón [POWER].

… En la indicación aparecerá "NO DISC".

… Conecte el amplificador y ajuste el

selector de entrada en MD.

2. Inserte un MD.

… Después que los datos TOC (Contenido

de la tabla) hayan sido leídos, el título

del disco (cuando el disco tiene un título

asignado en él), el número total de

pistas y el tiempo total de reproducción

del disco aparecerán indicados.

Número total de pistas Título de disco

Calendario musical

… El título del disco o de la pista puede ser

desplazado (hacia arriba o hacia abajo)

en la indicación con el botón [SCROLL]

del control remoto. Después del

desplazamiento, el título vuelve a su

indicación original.

Condensación

Cuando se traslada la platina

directamente de un lugar frío a uno

tibio, o cuando la temperatura se eleva

súbitamente en la sala donde la platina

está instalada, la humedad puede

condensarse dentro del mecanismo.

Esto evitará que la platina funcione

normalmente y puede resultar en daños

al MD o a los componentes de pre-

cisión. Si hay condensación, conecte la

alimentación de la platina y déjela

conectada durante una o dos horas

hasta que se evapore la humedad.

Butones empleados en esta página

ª Reproducción de una pista previa o

posterior a la pista actual

Gire el disco [

µ TRACK≤].

… Si está operando la unidad de control

remoto, seleccione la pista deseada

presionando los botones [

µTRACK≤]

o ingresando el número de pista con los

botones numéricos.

… El número de pista seleccionada inicia

la reproducción.

ª Eyección del MD

Presione el botón de eyección [øEJECT].

ª Auriculares

Cuando emplee los auriculares, conecte el

enchufe de los mismos al jack PHONES.

… Ajuste el nivel de la salida de señales

del jack phones.

Insértelo en el

sentido de la flecha.

Coloque el MD con el lado

de la etiqueta hacia arriba.

– 96 –

ENGLISH

A recorded track can be divided into two

tracks and a track number can be assigned

to the second track. This function is

designed for use when a single track

contains several musical pieces (for

example with an analog-recorded MD), or

when you want to mark a point for use in

track location.

(Example): To divide C and D contained in

track number 3 into two tracks

1. During playback, press the [

π READY]

button at the point where you want to

divide the current track into two.

2. Press the [EDIT/NO] button repeatedly

until "DIVIDE ?" is displayed.

3. Press the [YES] button.

… "Rehearsal" and "Point OK ?" are

displayed alternately while the first 4

seconds of the portion which becomes

the second track after division are

played repeatedly.

4. If the original track is not divided as

precisely as desired, you can fine-adjust

the division point by turning the

[

µTRACK≤] dial while monitoring

the sound.

… The division point can be adjusted

within an offset range of –128 ~ +127

(±1 corresponds to approx. 0.06 sec.).

… Press the [

ª STOP] button or [EDIT/NO]

button to abort the operation.

5. When the track is divided at the desired

point, press the [YES] button again.

… The track numbers of the new track

(second track after division) and

subsequent tracks are increased by one

but these new numbers are still

continuous.

… "COMPLETE" is displayed and the track

is divided. The deck will pause at the

beginning of new track obtained after

division.

tracks which have been recorded in

… Tracks obtained after division do not

have track titles, regardless of whether

the original track had one or not.

… The beginnings of tracks cannot be

divided.

Dividing a Track

(DIVIDE Function)

The order of tracks can be changed by

moving a track to another position. After

the track has been moved, track numbers

are automatically renumbered.

(Example): To move D from track number 4

to track number 2

1. During playback or pause, select the

track to be moved by turning the

[

µTRACK≤] dial.

2. Press the [EDIT/NO] button until

"MOVE ?" is displayed.

3. Press the [YES] button.

… "Move to 001?" is displayed. ("001"

blinks.)

Track number Destination track

to be moved number

4. Select the destination track number with

the [

µTRACK≤] dial.

… "Move to 002 ?" is displayed.

("002" blinks.)

… When you specify the destination track

number with the numeric buttons,

"COMPLETE" is displayed, then the track

is moved and the track numbers

are automatically changed. Playback

resumes from the track’s new location.

… Press the [

ª STOP] button or [EDIT/NO]

button to abort the operation.

5. Press the [YES] button again.

… "COMPLETE" is displayed, then the track

is moved and the track numbers

are automatically changed. Playback

resumes from the track’s new location.

Moving a Track (MOVE Function)

– 17 –

Two consecutive tracks can be combined

into a single track. This function is

designed for use when you want to play

several songs continuously or you want to

make a single track from many separately

recorded parts of music.

(Example): Combining B and C

1. Select a track number by turning the

[

µTRACK≤] dial.

… The selected track number will be

combined with the track before it.

For example, to combine track numbers

2 and 3, select track number 3 in this

step.

… If you select track 1, it will not be

combined into a single track.

2. Press the [EDIT/NO] button until

"COMBINE ?" is displayed.

3. Press the [YES] button.

… "Rehearsal" is displayed. The beginning

of the selected track is played back

repeatedly.

… If the combination point between the

two tracks is not played properly, press

the [EDIT/NO] button to stop playback

and restart the operation from the

beginning.

… Press the [

ª STOP] or [EDIT/NO] button

to abort the operation.

4. If the combination point is correct, press

the [YES] button again.

… "COMPLETE" is displayed for a few

seconds and the tracks are combined.

… When both tracks have titles assigned,

the title of the track before the selected

track is assigned to the combined

track. Subsequent track numbers are

decreased by one.

… Note that it is impossible to combine

tracks which have been recorded in

different modes (SP, MONO, LP2 and

LP4).

Combining Tracks

(COMBINE Function)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comments to this Manuals

No comments

Tascam MD-350 User Manual Page 17

Comments to this Manuals

Related products and manuals for Cassette Decks Tascam MD-350