Tascam MD-350 User Manual download pdf (Page 18)

6. Select each character by turning the

[

µTRACK≤] dial and pressing

[PUSH ENTER] on the dial.

… If you are using the remote control unit,

select each character with the

[

µ TRACK≤] buttons and press the

[ENTER] button to enter it.

7. Repeat steps 5-6.

8. Press the [YES] button after assigning

the disc title.

… The title entry mode for track 1 is

automatically engaged ("001 > _" is

displayed) and the cursor blinks on the

display.

9. Repeat steps 5-6.

10. Press the [YES] button again.

… When the title entry mode for track 2 is

engaged ("002 > _" is displayed), repeat

steps 5-8.

… Repeat the character entry procedure

until all titles have been entered. The

disc title is then displayed if the deck is

in the Stop mode, or if the deck is in the

Play mode, the current track title is

displayed.

… Confirm titles by turning the

[

µTRACK≤] dial.

… Press the [

ª STOP] button to abort the

operation.

Press the [EDIT/NO] button for more

than 3 seconds (or press the [TITLE

EDIT] button on the remote control unit)

to cancel the title function and resume

playback.

Notes:

… Up to 100 characters can be entered per

track title. However, when the total

number of characters of all track titles

exceeds 1700, no more track titles can

be written onto the MD.

… If the TITLE AUTO INC function is

canceled before all titles have been

assigned, the track title currently being

entered will be erased. Only track titles

which have already been assigned will

be kept.

… If UNDO is performed after TITLE AUTO

INC is completed, the last edited track

title will be canceled.

… Disc and track titles can be assigned

during recording.

… If a track title is assigned while in the

Record-Ready mode during the

overwrit-ing of a track, the track title

will be erased when you resume

recording.

… "DISC" lights while a disc title is being

entered, and "TRACK" lights while a

track title is being entered.

… Assigning titles is unavailable in the

"SHUFFLE MODE" or "PGM MODE".

– 18 –

Titles can be assigned to each disc or

each track using uppercase and

lowercase letters, numbers, " "

(Katakana) and symbols.

1. Press the [EDIT/NO] button so that

"TITLE ?" is displayed.

2. Press the [YES] button.

… Press the [TITLE EDIT] button if you are

using the remote control unit.

3. Select "DSC" or a track number using the

[

µTRACK≤] dial.

… To assign a disc title, select "TITLE >

DSC" ("DSC" blinks).

… To assign a track title, select "TITLE >

XXX (track number)" (Track number

blinks).

4. Press the [YES] button.

"DSC > _ " or "XXX > _ " is displayed.

… The character entry mode is engaged

and the cursor blinks on the display.

5. Press the [DISPLAY] button to select the

character type.

… When " " is lit: Katakana (square

Japanese syllabary) can be entered.

… When " " is lit: Capital alphabet

letters, numerals and symbols can be

entered.

… When no indicator is lit: Small alphabet

letters, numerals and symbols can be

entered.

6. Select each character by turning the

[

µTRACK≤] dial and pressing [PUSH

ENTER] on the dial.

Assigning Titles (TITLE Function)

7. Repeat steps 5-6.

… Press the[

ª STOP] button to abort the

operation.

… Press the [EDIT/NO] button for more

than 3 seconds (or press the [TITLE

EDIT] button on the remote control unit)

to cancel the title function and resume

playback

8. Press the [YES] button again.

… The disc or track title is displayed again.

… Repeat steps 1-8 to assign titles to other

track numbers.

Select the "CONTINUE" mode with the

[PLAY MODE] button. Titles can be

assigned to the disc and all tracks

successively.

1. Press the [EDIT/NO] button so that

"TITLE ?" is displayed.

2. Press the [YES] button.

… Press the [TITLE EDIT] button if you are

using the remote control unit.

3. Select "TITLE > AINC" with the

[

µTRACK≤] dial ("AINC" blinks).

4. Press the [YES] button.

… The disc title entry mode is engaged

("DSC > _" is displayed) and the cursor

blinks on the display.

… The cursor blinks at the first character

position even if a title has already been

assigned.

5. Press the [DISPLAY] button to select the

character type.

Assigning Titles to the Disc and

All Tracks Successively

(TITLE AUTO INC Function)

Buttons used on this page

Editing Recorded MDs

Notas sobre grabación

ª Para proteger un MD contra

borrado accidental

… Después de grabar el MD, deslice la

lengüeta de protección contra

grabación para que el orificio quede

abierto.

… Para grabar el MD otra vez, deslice la

lengüeta para cerrar el orificio.

ª Cuando aparece el mensaje

"Disc Full !!" o "Track Full !!"

El MD no tiene más espacio disponible para

grabar o todas las pistas del MD han sido

utilizadas. Borre las pistas que no necesite

o grabe la música en otro MD.

– 95 –

ESPAÑOL

ª La forma de asignación de los

números de pista varía

dependiendo de la fuente.

Cuando se reproduce un CD o un MD, y se

lo graba digitalmente seleccionado

[DIGITAL 1] o [DIGITAL 2] con el selector

[INPUT SELECTOR]:

… Los números de pista en el MD grabado

son asignados para adecuarse a los del

CD o MD fuente. Sin embargo, en los

casos abajo listados sólo un número de

pista puede ser asignado a una sección

grabada.

· Una sección compuesta de varias

repeticiones de una sóla pista en un

disco (ej.: empleando la

reproducción repetida de una sóla

pista).

· Una sección compuesta de

grabaciones sucesivas de pistas con el

mismo número de pista provenientes

de más de un disco. También, si la

fuente es un MD, los números de pista

pueden no ser marcadas para pistas

que tengan una duración menor a 3

segundos.

Cuando la fuente es grabada con

[ANALOG] o cuando se graba una fuente

digital que no sea un CD o MD con

[DIGITAL 1] o [DIGITAL 2] estando la

función de pista automática en OFF:

… Toda la grabación puede ser contada

como una sóla pista con un sólo

número de pista asignado a la misma.

· Los números de pista pueden ser

manualmente asignados en los

puntos deseados presionando el

botón [

º RECORD] durante la

grabación.

· Los números de pista pueden ser

automáticamente asignados conmut-

ando al función de pista automática

a "A_TRACK > ON" antes de iniciar la

grabación.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comments to this Manuals

No comments

Tascam MD-350 User Manual Page 18

Comments to this Manuals

Related products and manuals for Cassette Decks Tascam MD-350