Tascam MD-301mkII User Manual download pdf (Page 22)

– 22 –

Troubleshooting Specifications

Format: MiniDisc digital audio system

Recording system:

Magnetic field modulation overwrite

system

Recording/playback time:

Stereo: 74 minutes max.

Mono: 148 minutes max.

Sampling frequency: 44.1 kHz

Compression system: ATRAC (Adaptive

TRansform Acoustic Coding)

Dynamic range:

More than 94 dB (playback, 1 kHz,

A filter)

Total harmonic distortion:

Less than 0.013%

Number of channels: 2 (stereo),1 (mono)

Frequency response:

20 Hz – 20 kHz ± 0.5 dB (playback)

Signal-to-noise ratio:

More than 94 dB (playback, A filter)

Analog input/output connectors:

Input:

Balanced: XLR, +4 dBu (ref.),

10 kohms

Unbalanced: RCA, –10 dBV (ref.),

` 50 kohms

Output:

Balanced: XLR, +4 dBu (ref.),

150 ohms

Unbalanced: RCA, –10 dBV (ref.),

600 ohms

Power supply:

120 V AC, 60 Hz

(U.S.A./Canada model),

230 V AC, 50 Hz

(Europe/General export model),

240 V AC, 50 Hz

(Australia model)

Headphones output: Max. 25 mW + 25 mW,

32 ohms

Digital input/output connectors:

Input 1, 2:

TOS (EIAJ RC-5720), IEC60958

Type II (S/PDIF)

Output:

TOS (EIAJ RC-5720), IEC60958

Type II (S/PDIF)

Remote connector:

KEYBOARD connector: Mini DIN 6pin

Power consumption: 13 W

Dimensions (W x H x D):

482.6 x 94 x 313 (mm)

Weight: 5.5 kg

Accessories:

Remote control unit (RC-32) x 1

Battery (SUM-3, "AA", "R6" type) x 2

Lettering guide x 1

Rack mounting screw kit x 1

… Improvements may result in specifi-

cations or feature changes without

notice.

… Photos and illustrations may differ

slightly from production models.

* US and foreign patents licensed from

Dolby Laboratories Licensing Corpora-

tion.

If you have any problems with the deck, please check the following before calling for service.

If the trouble persists, please consult your dealer or nearest TEAC service agent.

Problem Remedy

No operations are possible. The MD is dirty or damaged. If "Disc Error !" is display-

ed in this case, replace the MD with another disc.

Playback will not start. Check if power is supplied.

"Blank Disc" is displayed if the MD contains no record-

ed data. "No Track !!" is displayed if no tracks have been

recorded on the disc. Replace the MD with a pre-

recorded MD.

When "UTOC Error !" is displayed, replace the MD with

another disc.

There may be condensation inside the deck. In this case,

eject the MD and leave the deck on for a few hours.

Recording will not start. When "Protected !!" is displayed, the MD is protected

against accidental erasure. Slide the accidental

erasure protection tab to close the hole. A playback-only

MD is loaded. Replace the MD with a recordable one.

When "D-IN UNLOCK !" is displayed and the source audio

is not input, connect the source through digital connection

or record the audio using the analog input.

Timer recording is unavailable.

After timer recording, turn the power back on within 3 or

4 days and eject the MD. If the deck is left off for a long

time, the recorded contents may disappear.

When "Disc Full !!" is displayed, the disc has no remain-

ing time available for recording. Erase unnecessary

tracks or use another MD.

When "Rec Error !!" is displayed, there is an error in

recording. Restart recording from the beginning.

Too much noise. Do not operate this deck near a TV.

ª U-TOC

Editing recorded tracks is easy with

recordable MiniDiscs. Information about

the recorded tracks (start address, end

address, title, etc.) is recorded in the U-

TOC (User Table Of Contents) area. You can

edit tracks simply by rewriting this data.

Music Data

U-TOC

… If normal operation cannot be recovered, unplug the power cord from the outlet and plug it

again.

1 2 ... 17 18 19 20 21 22 23

Comments to this Manuals

No comments

Tascam MD-301mkII User Manual Page 22

Comments to this Manuals

Related products and manuals for Cassette players Tascam MD-301mkII