Tascam MD-301mkII User Manual download pdf (Page 8)

– 8 –

Recording

1. Press the [POWER] button.

… "NO DISC" appears on the display.

… Turn on the source component and the

amplifier. Set the input selector to the

source component.

2. Insert a recordable MD.

… When a blank MD is inserted, the display

shows "Disc Loading", "TOC Reading",

"No Track !!" and "Blank Disc" in

sequence.

… When a partially recorded MD is

inserted, the deck will automatically

start recording from the end of the last

recorded track.

3. Select the input with the [INPUT

SELECTOR].

Display Selected Input

ANALOG ANALOG INPUT

DIGITAL 1 DIGITAL INPUT 1

(OPTICAL)

DIGITAL 2 DIGITAL IN 2 (OPTICAL)

(front panel)

4. Select the recording mode with the [REC

MODE] switch.

… When [STEREO] is selected, stereo

recording will be performed.

… When [MONO] is selected, monaural

recording will be performed using only

the left (L) channel. "L" appears on the

level meter, but the output is sent to both

channels.

Recording an MD

Insert in the direction of

the arrow.

Hold the MD with the

label side up.

… The maximum amount of time available

with monaural recording is twice that of

stereo recording.

5. Press the [

º RECORD] button.

… The deck enters the Record-Ready mode

lights up).

… "Disc Full !!" or "Track Full !!" is displayed

when no room is available on the MD for

recording.

6. Adjust the recording level.

… If [ANALOG] was selected above,

adjust the recording level with the

[INPUT] control.

… When adjusting the recording level,

adjust so that the "OVER" segments of the

peak level meter do not light up.

7. Start recording.

Press the [

¥PLAY] button or the

[

π READY] button ( "¥

lights up).

Start playing the source program.

8. To stop recording, press the [

ª STOP]

button.

ª To stop recording temporarily (ready)

Press the [

π READY] button.

… Press the [

¥PLAY] or [π READY] button

to resume recording.

… Whenever you pause recording, the

track number increases by one.

ª To eject the MD

Press the [ø EJECT] button.

If the power is turned off with the MD left

in the deck (" " lights up) after

recording, the UTOC cannot be recorded.

Turn the power back on within 3 or 4 days

and eject the MD. The recorded data might

be lost if the MD is left in the deck for a long

time.

Notes on Recording

ª To protect an MD against

accidental erasure

… After recording an MD, slide the record-

protect tab to open the hole.

… To record on the MD again, slide the tab

to close the hole.

ª When "Disc Full !!" or "Track

Full !!" is displayed

The MD has no more available space for

recording or the MD has used up all its

track numbers. Erase unnecessary tracks

or record music on another MD.

ª The way track numbers are

assigned varies depending on

the source

When a CD or MD is played and recorded

digitally by selecting [DIGITAL 1/2] with the

[INPUT SELECTOR]:

… Track numbers on the recorded MD are

assigned to match those on the source

CD or MD. However, in the circum-

stances listed below only one track

number may be assigned to a recorded

section.

· A section composed of the repeated

playback of a single track on a disc

(e.g. using single track repeat

playback).

· A section composed of the succes-

sive recording of tracks with the same

track number from more than one

disc. Also, if the source is an MD,

track numbers may not be marked for

tracks shorter than 3 seconds.

When the source is recorded with

[ANALOG] or when a digital source other

than a CD or MD is recorded with [DIGITAL

1] or [DIGITAL 2] while the Auto Track

function is OFF:

… The entire recording may be counted as

a single track with only one track

number assigned to it.

· Track numbers can be assigned

manually at the desired points by

pressing the [

º RECORD] button

during recording.

· Track numbers can be assigned

automatically by switching the Auto

Track function to "A_TRACK > ON"

before starting recording.

Buttons used on this page

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Comments to this Manuals

No comments

Tascam MD-301mkII User Manual Page 8

Comments to this Manuals

Related products and manuals for Cassette players Tascam MD-301mkII