Tascam CD-A500 Owner's Manual download pdf (Page 7)

∑ Even if the disc tray is open ...

When the å button is pressed:

The disc tray will close and playback starts

from the first track.

∑ To stop playback

Press the STOP button. The player enters

the Stop mode.

To unload the disc:

Press the OPEN/CLOSE button; playback

stops and the disc tray will slide out, and all

functions are reset to their initial settings.

To temporarily suspend playback

(Ready mode):

Press the ƒ button. Playback stops at the

current position and the ƒ indicator lights

steadily. To resume playback from the

same position, press the ∏ or ƒ button.

CAUTION :

O Do not force the tray by hand during

opening and closing operations.

_

7

_

1. Press the POWER switch.

2. Press the OPEN/CLOSE button.

The disc tray will slide out. Place the

disc gently on the tray with its label side

facing upward. The disc is set within the

disc guides at the center of the tray.

3. Press the OPEN/CLOSE button again.

The disc tray will close.

Several seconds later, the following

information is displayed.

4. Press the CD PLAY (∏) button.

Disc playback starts from the first track,

and the ∏ (play) indicator will light.

O During playback, the number of the cur-

rently played tune blinks on the music

calendar.

O When tunes have been played, their

numbers will disappear from the Music

Calendar display.

CD Player

Basic Operation

For 8 cm (3-inch)

CD singles

For 12 cm (5-inch)

Compact Discs

Tune numbers on disc up to 20

Total number of

tunes on the disc

Total playback

time of disc

∑ Music search using SKIP but-

tons (Ú/Æ)

The beginning of any tune can be easily

located using the Ú/Æ SKIP buttons.

This operation is indicated clearly in the

TRACK display.

O This operation is possible even in the

Program Playback mode. However, only

programmed tunes will be detected.

∑ To skip to the next tune

Press the Æ button.

The player will skip ahead to the next tune

each time the Æ button is pressed. The

player can be advanced to the last tune this

way, but once the beginning of the last tune

is reached, the player will not advance

even if the Æ button is pressed.

∑ To skip back to the previous tune

Press the Ú button.

The player will skip back one tune each

time the Ú button is pressed. If this but-

ton is pressed in the middle of a tune, the

player will skip back to the beginning of the

current tune. To make it skip back to the

previous tune, the button must be pressed

twice.

In this way, the player can be returned to

the beginning of the first tune on the disc.

∑ Music search using SEARCH

buttons (/Ò)

During playback or in the Ready mode, hold

down the Ò button of the remote control

or the Æ button of the main unit to move

the playing position quickly in the forward

direction, and hold down the  button of

the remote control or the Ú button of the

main unit to move quickly in the reverse

direction.

During the manual search operation, sound

will be audible but the output level will be

lowered. This lets you search for any

required portion while checking the sound.

When the desired position is reached,

release the button to reenter the previous

mode.

Music Search Operation

or

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Comments to this Manuals

No comments