Tascam CD-A500 Owner's Manual download pdf (Page 8)

∑ To display the total program time

In the Program mode, press the TIME but-

ton to display the total program time.

Pressing the TIME button again will return

the CD player to the Program mode.

∑ To review the program contents

1. Press the CHECK button in the Program

mode.

The first programmed track number will

light and "P-01" will blink in the display.

2. Each time the CHECK button is pressed,

the next programmed track number will

light.

"P-XX (Program number)" will blink in the

display.

O When the last programmed track num-

ber is displayed, pressing the CHECK

button will return the CD player to the

Program mode, allowing you to add

tracks to the program.

O The track numbers stored in the pro-

gram memory will be displayed on the

Music Calendar. However, please note

that the Calendar can handle only up to

track 20. If higher track numbers are

entered in the Program memory, the

OVER indicator will light.

∑ To cancel a programmed track

Pressing the CLEAR button will cancel the

last programmed track.

∑ Delete programming

This is the opposite to normal pro-gram-

ming, and is used to program tunes which

are not to be played. Use it when there are

tunes on the disc you don't want to listen to.

1. Press the STOP button.

2. Press the DELETE button.

The CD player enters the Delete

Program mode.

The "DELETE" and "PGM" indicators light

in the display.

3. Alternately press the Ú SKIP Æ

button(s) and the PROGRAM button in

any desired order.

4. Press the PLAY button.

Delete-programmed playback starts.

O In the Delete-Program mode, pressing

the TIME button will display the total

time of the non-deleted tracks. Pressing

the TIME button again will return the

player to the Delete-Program mode.

O Pressing the CHECK button in the

Delete-Program mode will display the

first deleted track number.

Each time the CHECK button is pressed,

the next deleted track number will be

displayed. When the last deleted track

number is displayed, pressing the

CHECK button will return the player to

the Delete-Program mode, allowing you

to delete other tracks.

O Pressing the CLEAR button will cancel

the last delete-programmed track.

O Pressing the STOP button when the

player is stopped will clear the delete-

program memory.

The program playback function allows you

to program up to 20 tunes (tracks) for play-

back in any desired order.

∑ Programming required tunes

1. Press the STOP button.

2. Press the PROGRAM button.

The player enters the Program mode.

The PGM indicator lights in the display.

3. Alternately press the Ú SKIP Æ

button(s) and the PROGRAM button in

the following order.

4. Press the ∏ button.

Programmed playback starts from the

first programmed tune.

O Programming tunes is possible only

when the player is in the Stop mode.

O The programmed contents will be held

in memory even after programmed play-

back has been completed or when pro-

grammed playback is stopped by press-

ing the STOP button.

O When the STOP button is pressed in the

stop mode, the contents of the program

are erased.

O To release the program mode, press the

PROGRAM button again.

O During program playback, the TOTAL

REMAIN time display shows the total

remaining time of the programmed

tunes, from the current position.

O If tunes with numbers higher than 32 are

programmed, TOTAL time may not

appear in the display. ("nn:nn" appears in

the display.)

Program Playback

Example

To program tunes in the order 5 @ 2 @

8 in the Stop mode.

(select 5) (select 2)(enter)

(select 8) (enter)(enter)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Comments to this Manuals

No comments

Tascam CD-A500 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for CD players Tascam CD-A500